Trailer Liberty
The HICKER is a TEARDROP delivered with its chassis, its cell and its front box The box is to be configured and fitted out by the customer.
The cell is delivered with its external finish in aluminum panels (color to be chosen when ordering) as well as its white lacquered aluminum finish on the inside.
All walls are insulated with Armaflex.
The floor is marine plywood.
The rear opening is part of the basic configuration, but no arrangement in the upper part ( or in the lower part (technical area) is provided.
This HICKER version
Configuration of it
This HICKER version is a base for a DIY TEARDROP Each customer can arrange it according to his desires, his own tastes and choices
FRAME
- • Steel frame with Polyurethane finish (Line X / Raptor)
- • Al KO axle 1300kg
- • 17" 5x112 rims
- • Full LED lights
- • 7 or 13 pin connector
- • Wheel chocks (2 units
- • Cell in aluminum structure with Armaflex insulation and interior / exterior aluminum finish.
- • Weight in Full version of approximately 620/650Kg (in the
- process of finalizing series development
- • Clearance lights
- • Mudguard / Aluminum steps
- • Homologation with CoC in progress (expected to obtain September / October 2023).
- • Predicted start of production for the series November / December 2023.
CELL (EXTERIOR)
- • 1 door (right side) with mosquito net that can be locked from the outside and from the inside
- • 1 sliding window (right side), with mosquito net and blackout curtain
CELL (INTERIOR)
- • Empty cell to be fitted out entirely by the client
- • The Cell is delivered with interior finishing panels
- • The cell is delivered with Armaflex insulation.
- • The floor is marine plywood.
FRONT BOX
- • Empty box to be fitted out entirely by the customer
KITCHEN AREA
- • The kitchen area is delivered without fittings
- • The kitchen area is to be fitted out entirely by the client
TECHICAL AREA UNDER KITCHEN
- • The technical area is delivered without fittings and accessories
- • The technical area to be fitted out entirely by the client
COLORS
- • Painting of your choice from a pre
- defined range: Cold grey, warm grey, white, aluminum grey, brown, green,
- red ( aluminium panel hot painted in the factory).
- Side lighting (right and left)
- • Possibility of custom color or total covering
- • Total coating in Polyurethane type Line X or Raptor
OPTIONS
- • Door on the left side with mosquito net that can be locked
- from the outside and from the inside
- • Shelf on the right side
- • Support for gallery or roof tent
- • Thule awning 190 black
- • 110Ah slow discharge battery (supplied only)
- • 200 Ah Lithium battery (supplied only)
- • Charging via 220V network cable
- • Recharge via 150 W solar panel (supply only)
- • 220V pure Sinus 5000W converter (supplied only)
- • 220V pure Sinus 10000W converter (supplied only)
- • 2kg ABC fire extinguisher (supplied only)
- • Autonomous 5kw Diesel heating (supply only)
- • Bluetooth reversing camera with screen in the vehicle
- • Desilting plate (supplied only)